LVT Flooring Production Line
LVT Flooring Production Line Features
High production capacity, with a daily output of 30-60 tons/24 hours. The linear speed reaches 6~10 m/min.
Machine with balance layer lamination equipment. Laminating the balance layer on the LVT bottom layer to solve the problem of LVT floor warping.
The LVT flooring from this production linemeet the European TUV certification.
Kingshine patent online EIR system is optional to use in this line. With on line EIR system can make high-end EIR LVT floor products.
The equipment adopts international topbrand configuration: ABB frequency converter, Siemens motor, Siemens PLC, original Schneider Electric, servo cutter, etc. It is high accuracy and automation.
Advantages of LVT Floor
1. Green environmental protection
PVC flooring is mainly produced from PVC, PVC is environmentally friendly and non-toxic renewable resources.
2. Super strong wear resistance
The PVC floor has a special PVC wear-resisting layer on the surface, and its wear resistance can reach 300000 revolutions. It can be used for 5-10 years under normal conditions according to the different wear-resistant thickness.
3. High elasticity and super strong impact resistance.
The PVC floor is soft in texture and has good elasticity. It has good elasticity recovery under the impact of heavy objects.
4. Fire retardant
Qualified PVC floor fire resistance index can reach B1, B1 that is, fire performance is very good, second only to stone. Fire is extinguished.
5. Easy maintenance
PVC floor maintenance is very convenient. The floor is dirty and can be wiped with mop. If you want to maintain the lasting brightness of the floor, only need to regularly wax maintenance can be, its maintenance times are far lower than the laminated floor.
6. Waterproof and moisture proof
PVC flooring is mainly composed of vinyl resin, and water has no affinity, so it is naturally not afraid of water, as long as not long-term immersion will not be damaged; and not because of high humidity and mildew.
Four Roller Calender System
LVT flooring production line use horizontal 4 roller calander system, and this is a special design. Contrast to the normal vertical 4 roller type, the 4-roll not only greatly improves the production efficiency, but also enables the color film and wear-resistant layer to be more closely bonded to the sheet and increase their peeling strength.
The roller is heated by oil, so the color film and wear layer is bonded to the sheet by hot press without glue.
The first two roller is to control the sheet thickness, increasing sheet’s ductibility and plasticization.
The third roller is laminating roller, our roller have a bigger design, and its diameter is 450mm. Contrast to other 400mm normal one, our bigger size laminating roller can increase the bonding area between the color film and the wear-resistant layer and the sheet, so that they can be more closely adhered together, and increase their peel strength.
The last roller is embossing roller, and the design can be changed easily.
Water Cooling Pool
To cool down the LVT sheet soon and make the sheet have a better performance
Dryer Roller and Air Dryer
To dry the LVT sheet soon by two dryer roller and two air dryer
Traction/Haul off
There are two tractors equipped with four rubber rollers to increase traction stability
Cutter
To cut the floor to big piece firstly